OnTime Networks
›› Rugged Ethernet and Timing Solutions

  • Product Description
  • Key Features
  • Product Comparison
  • Product Versions
  • Documentation

Industrial - Managed: BLUEBERRY BM-1700 SERIES

Product Description

The Blueberry BM-1700 Series - Managed Industrial Ethernet Switch with 7 x 10/100BASE-TX (RJ-45) + 3x 10/100/1000BASE-X combo ports

bm300The switches in the BM-1700 series offer full management based on HTTP, telnet, CLI, SNMP or the Windows Open Vision software application. Network Redundancy is achieved based on the OnTime-Ring- (recovery time < 10ms over 250 units of connection), OnTime-RSTP- or MSTP/RSTP/STP (IEEE 802.1s/w/D) protocol. The switch is designed for industrial environments and offers a wide operating temperature range, [-40°C..70°C]. Three of the ports are of gigabit combo type. A combo port will act as a 10/100/1000BASE-TX (copper) port if no plug-able fiber transceiver (SFP) is installed, while the copper port will be disabled if a SFP is installed in the corresponding SFP cage. Up to three SFPs of the following types can be installed in the three SFP cages:

  • 1000BASE-SX, 1000Mbps, multi-mode (850nm) LC connector - 550m
  • 1000BASE-LX, 1000Mbps, single-mode (1310nm) LC connector - 10km
Other SFPs including BIDI fiber transceivers for other fiber lengths are available on request. The unit supports multicast filtering (IGMP snooping), IEEE802.1Q VLAN and Event notification, through Syslog, Email, and SNMP trap. The BM-1700 further features dual redundant DC power inputs, DIN-Rail Mounting and comes in an IP30 Aluminum case.

Other SFPs including BIDI fiber transceivers for other fiber lengths are available on request. The BM-300 further features dual DC power inputs, DIN-Rail Mounting and comes in an IP30 Aluminum case.
standards

bm300_dimensions

Key Features

The BLUEBERRY BM-Series offers fully managed Ethernet switches for Industrial applications

Interoperability

The Blueberry BM-Series Industrial Ethernet switches support all relevant IEEE Ethernet standards.

Management The Blueberry BM-Series Ethernet switches offer full management based on HTTP, telnet, CLI or SNMP v1/v2/v3. 
VLAN 802.1Q Port based VLAN (static) or dynamic VLAN according to IEEE802.1Q are supported.
Security Port based access according to IEEE802.1x is supported (BM-series
Power Over Ethernet

IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) *applies to PoE+ devices

IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.) *applies PoE devices

Fiber Connections Small Form-factor Pluggable (SFP) transceivers for all types of multi-mode or single-mode optical fibers

Product Comparison

Blueberry BM-Series product comparison chart

Switches for DIN-rail mounting

 BM-300BM-1500BM-1600BM-1700 BM-3700
10/100BASE-TX RJ45 47 8  
10/100/1000BASE-TX RJ-45    4  8
100BASE-FX SFP 2      
1000BASE--X SFP      4
1000BASE-COMBO SFP  3 4 2  
PoE/ PoE+ Ports    8 PoE+ 8 PoE+

Switches for 19" rack-mounting

  BM-1900 BM-2900 BM-3900         
10/100BASE-TX RJ45 24     
10/100/1000BASE-TX RJ-45  2424   
100BASE-FX SFP     .  
1000BASE--X SFP  44   
1000BASE-COMBO SFP 2     
PoE/ PoE+ Ports   24 PoE+   

Product Versions

Managed Industrial PoE/PoE+ 10 Port Ethernet Switch with 8 x 10/100BASE-TX ports + 2x 10/100/1000BASE-X combo SFP/RJ45ports and following options:

Article No.Product Description
BM-1710FC0-AT(without transceivers)
BM-1710FC1-SX-AT1 x 1000BASE-SX-550m (LC), 850nm multi-mode
BM-1710FC2-SX-AT2 x 1000BASE-SX-550m (LC), 850nm multi-mode
BM-1710FC1-LX-AT1 x 1000BASE-LX-10km (LC), 1310nm single mode
BM-1710FC2-LX-AT2 x 1000BASE-LX-10km (LC), 1310nm single mode

Other combinations including BIDI fiber transceivers for other fiber lengths are available on request.

Requests and orders can be sent to contact@ontimenet.com

Documentation

Managed Industrial PoE/PoE+ 10 Port Ethernet Switch with 8 x 10/100BASE-TX ports + 2x 10/100/1000BASE-X combo SFP/RJ45ports

BM-1700 Key Features Documentation
bm2900
  • 8 x 10/100BASE-TX ports
  • 2 x 10/100/1000BASE-X combo ports
  • PoE+ on each of the 10/100BASE-TX ports (up to 30W per port) if AT option is ordered
  • Network redundancy: OnTime-Ring- or MSTP/RSTP/STP protocol
  • Network management: Web, telnet, CLI and SNMP v1/v2/v3
  • Multicast filtering: IGMP snooping
  • IEEE802.1Q VLAN
  • Event notification: through Syslog, Email, and SNMP trap
  • Wide operating temperature: [-40°C..70°C]
  • Dual redundant DC power input

Request Quote

Coming Soon!